SalixOS 14, XFCE, Thunar not automounting

Ovde možete postaviti pitanje vezano za instalaciju i podešavanje Slack-baziranih distribucija

Moderator: Urednik


Administrator
Administrator
offline
User avatar

Posts: 877
Joined: 25 May 2008, 10:44
Location: Valjevo, Srbija

Post Napisano: 15 Aug 2012, 20:57


@mono :evil:

Mozes li u medjuvremenu da nam ovde okacis .xinitrc fajl...da bacim pogled :afro:
nije važno samo raditi ono što voliš...važnije je voleti ono što radiš



Administrator
Administrator
offline
User avatar

Posts: 3451
Joined: 01 Apr 2012, 13:50
Location: Mlečni put

Post Napisano: 15 Aug 2012, 21:20


Vidi ti drummera, "mono" haha :)

Tebi nema pivo :)

Evo ispisa,

Code: Select all

#!/bin/sh

# fix broken $UID on some system...
if test "x$UID" = "x"; then
	if test -x /usr/xpg4/bin/id; then
		UID=`/usr/xpg4/bin/id -u`;
	else
		UID=`id -u`;
	fi
fi

# $XDG_CONFIG_HOME defines the base directory relative to which user specific 
# configuration files should be stored. If $XDG_CONFIG_HOME is either not set 
# or empty, a default equal to $HOME/.config should be used.
if test "x$XDG_CONFIG_HOME" = "x" ; then
  XDG_CONFIG_HOME=$HOME/.config
fi
[ -d "$XDG_CONFIG_HOME" ] || mkdir "$XDG_CONFIG_HOME"

# $XDG_CACHE_HOME defines the base directory relative to which user specific 
# non-essential data files should be stored. If $XDG_CACHE_HOME is either not 
# set or empty, a default equal to $HOME/.cache should be used.
if test "x$XDG_CACHE_HOME" = "x" ; then
  XDG_CACHE_HOME=$HOME/.cache
fi
[ -d "$XDG_CACHE_HOME" ] || mkdir "$XDG_CACHE_HOME"


# set up XDG user directores.  see
# http://freedesktop.org/wiki/Software/xdg-user-dirs
if type xdg-user-dirs-update >/dev/null 2>&1; then
    xdg-user-dirs-update
fi

if test -f "$XDG_CONFIG_HOME/user-dirs.dirs"; then
    . "$XDG_CONFIG_HOME/user-dirs.dirs"
    # i'm deliberately not 'export'-ing the XDG_ vars, because you shouldn't
    # rely on the env vars inside apps, since the file could be changed at
    # any time by the user.  this is solely here for migration purposes.

    # a bit of user dir migration...
    if test -d "$HOME/Desktop" -a ! -L "$HOME/Desktop" \
            -a "$XDG_DESKTOP_DIR" \
            -a "$HOME/Desktop" != "$XDG_DESKTOP_DIR"
    then
        echo "Migrating $HOME/Desktop to $XDG_DESKTOP_DIR..."
        test -d "$XDG_DESKTOP_DIR" && rmdir "$XDG_DESKTOP_DIR"
        mv "$HOME/Desktop" "$XDG_DESKTOP_DIR" || echo "Desktop migration failed" >&2
    fi

    if test -d "$HOME/Templates" -a ! -L "$HOME/Templates" \
            -a "$XDG_TEMPLATES_DIR" \
            -a "$HOME/Templates" != "$XDG_TEMPLATES_DIR"
    then
        echo "Migrating $HOME/Templates to $XDG_TEMPLATES_DIR..."
        test -d "$XDG_TEMPLATES_DIR" && rmdir "$XDG_TEMPLATES_DIR"
        mv "$HOME/Templates" "$XDG_TEMPLATES_DIR" || echo "Templates migration failed" >&2
    fi
fi


# Modify libglade and glade environment variables so that
# it will find the files installed by Xfce
export LIBGLADE_MODULE_PATH="$LIBGLADE_MODULE_PATH:/usr/lib64/libglade/2.0"
export GLADE_CATALOG_PATH="$GLADE_CATALOG_PATH:"
export GLADE_PIXMAP_PATH="$GLADE_PIXMAP_PATH:"
export GLADE_MODULE_PATH="$GLADE_MODULE_PATH:"


# Export GTK_PATH so that GTK+ can find the Xfce theme engine
export GTK_PATH="$GTK_PATH:/usr/lib64/gtk-2.0"


# For now, start with an empty list
XRESOURCES=""

# Has to go prior to merging Xft.xrdb, as its the "Defaults" file
test -r "/etc/xfce/xdg/xfce4/Xft.xrdb" && XRESOURCES="$XRESOURCES /etc/xfce/xdg/xfce4/Xft.xrdb"
test -r $HOME/.Xdefaults && XRESOURCES="$XRESOURCES $HOME/.Xdefaults"

BASEDIR=$XDG_CONFIG_HOME/xfce4
if test -r "$BASEDIR/Xft.xrdb"; then
  XRESOURCES="$XRESOURCES $BASEDIR/Xft.xrdb"
elif test -r "$XFCE4HOME/Xft.xrdb"; then
  mkdir -p "$BASEDIR"
  cp "$XFCE4HOME/Xft.xrdb" "$BASEDIR"/
  XRESOURCES="$XRESOURCES $BASEDIR/Xft.xrdb"
fi

# merge in X cursor settings
test -r "$BASEDIR/Xcursor.xrdb" && XRESOURCES="$XRESOURCES $BASEDIR/Xcursor.xrdb"

# ~/.Xresources contains overrides to the above
test -r "$HOME/.Xresources" && XRESOURCES="$XRESOURCES $HOME/.Xresources"

# load all X resources (adds /dev/null to avoid an empty list that would hang the process)
cat /dev/null $XRESOURCES | xrdb -nocpp -merge -

# load local modmap
test -r /etc/X11/xinit/.Xmodmap && xmodmap /etc/X11/xinit/.Xmodmap
test -r $HOME/.Xmodmap && xmodmap $HOME/.Xmodmap

# Launch xscreensaver (if available), but only as non-root user
if test $UID -gt 0 -a -z "$VNCSESSION"; then 
    if test x"`which xscreensaver 2>/dev/null`" != x""; then
        xscreensaver -no-splash &
    elif test x"`which gnome-screensaver 2>/dev/null`" != x""; then
        gnome-screensaver &
    fi
fi 

# Use ssh-agent if installed and not already running.  Run it separately
# so it populates the environment here, so we can clean it up later.
sshagent=`which ssh-agent`
kill_sshagent=0
if test -z "$SSH_AGENT_PID" -a "$sshagent" -a "x$sshagent" != "xno"; then
	eval `$sshagent -s`
	kill_sshagent=1
fi

# Use dbus-launch if installed.
if test x"$DBUS_SESSION_BUS_ADDRESS" = x""; then
	dbuslaunch=`which dbus-launch`
	if test x"$dbuslaunch" != x"" -a x"$dbuslaunch" != x"no"; then
		eval `$dbuslaunch --sh-syntax --exit-with-session`
	fi
fi

# Run xfce4-session if installed
xfcesm=`which xfce4-session`
case "x$xfcesm" in
	x|xno*)
		;;
	*)
                if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
                        ck-launch-session $xfcesm
                else
                        $xfcesm
                fi

		if test $kill_sshagent -eq 1; then
			eval `$sshagent -k`
		fi
		exit 0
		;;
esac


##################
# IMPORTANT NOTE #
##################

# Everything below here ONLY gets executed if you are NOT using xfce4-session
# (Xfce's session manager).  If you are using the session manager, everything
# below is handled by it, and the code below is not executed at all.  If you're
# not sure if you're using the session manager, type 'ps -e|grep xfce4-session'
# in a terminal while Xfce is running.

##################


# this is only necessary when running w/o xfce4-session
xsetroot -solid black -cursor_name watch

# or use old-fashioned startup script otherwise

xfsettingsd &
xfwm4 --daemon

# start up stuff in $XDG_CONFIG_HOME/autostart/, as that looks to be
# the new standard.  if that directory doesn't exist, try the old
# ~/Desktop/Autostart method.  we're not going to do any migration here.
if test -d "$XDG_CONFIG_HOME/autostart"; then
  for i in ${XDG_CONFIG_HOME}/autostart/*.desktop; do
    grep -q -E "^Hidden=true" "$i" && continue
    if grep -q -E "^OnlyShowIn=" "$i"; then
      # need to test twice, as lack of the line entirely means we still run it
      grep -E "^OnlyShowIn=" "$i" | grep -q 'XFCE;' || continue
    fi
    grep -E "^NotShowIn=" "$i" | grep -q 'XFCE;' && continue
    
    # check for TryExec
    trycmd=`grep -E "^TryExec=" "$i" | cut -d'=' -f2`
    if test "$trycmd"; then
      type "$trycmd" >/dev/null 2>&1 || continue
    fi
    
    cmd=`grep -E "^Exec=" "$i" | cut -d'=' -f2`
    if test "$cmd" && type "$cmd" >/dev/null 2>&1; then
      $cmd &
    fi
  done
elif test -d "$HOME/Desktop/Autostart"; then
  for i in `ls -1 -L ${HOME}/Desktop/Autostart/ 2>/dev/null`; do
    if test -x $HOME/Desktop/Autostart/$i; then
      $HOME/Desktop/Autostart/$i &
    fi
  done
fi

xfdesktop&
orage &

panel=`which xfce4-panel`
case "x$panel" in
	x|xno*)
		;;
	*)
		$panel
		ret=$?
		while test $ret -ne 0; do
			xmessage -center -file - -timeout 20 -title Error <<EOF
A crash occured in the panel
Please report this to the xfce4-dev@xfce.org list
or on http://bugs.xfce.org
Meanwhile the panel will be restarted
EOF
			cat >&2 <<EOF
A crash occured in the panel
Please report this to the xfce4-dev@xfce.org list
or on http://bugs.xfce.org
Meanwhile the panel will be restarted
EOF
			$panel
			ret=$?
		done
		;;
esac

if test $kill_sshagent -eq 1; then
	eval `$sshagent -k`
fi

xsetroot -bg white -fg red  -solid black -cursor_name watch
exec ck-launch-session dbus-launch --exit-with-session startxfce4
Use the source, Luke
SSZ irc kanal
Spread the Word, “CHOOSE SLACK! and Don’t look back.”



Administrator
Administrator
offline
User avatar

Posts: 3451
Joined: 01 Apr 2012, 13:50
Location: Mlečni put

Post Napisano: 01 Sep 2012, 18:29


Nakon nekoliko update procesa, sve je najnovije što može ali problem sa Thunarom i automontiranjem i dalje postoji. U Slackware 14 toga nema odnosno automatsko montiranje radi kako treba od prvog dana.
Da li možda neko ima predlog neki?
Use the source, Luke
SSZ irc kanal
Spread the Word, “CHOOSE SLACK! and Don’t look back.”


Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests