Pregledao sam /var/log/dmesg, /var/log/messages i /var/log/Xorg.0.log ali kačim ovde da još neko pogleda.
Instalacija je išla sledećim tokom:
1. napustio sam X i izlogovao sam se
2. logovao sam se kao root korisnik i u tty1 i u tty2 i promenio lokalizaciju na en@UTF-8
3. reboot
4. u tty2 preko links čitam README
u tty1 rsync-ujem
5. instaliram neophodne pakete koji su u uputstvu
6. nadogradnja i instalacija KDE 4.11.5
7. podešavanje /etc/rc.d/rc.4 da login manager bude KDM i restartujem mašinu.
U početku sve izgleda dobro, sistem se startuje, logujem se kreće KDE i sve radi kako treba. Nisam ni stigao mnogo da se igram a već je krenulo da puca. Zacrni se ekran i ne reaguje ni miš ni tastatura ni sysrq, ništa... Fizički restart. I tako malo radi pa mora da se restartuje.
Kad se zakuca probao sam i preko ssh da pristupim ali bez uspeha. Napominjem da prilikom instalacije sistema nisam birao KDE pakete. U Erikovom uputstvu stoji koji su paketi neophodni pre instalacije KDE 4.11.5 pa sam to instalirao i zatim njegove pakete.
KDE mi sad nije nimalo upotrebljiv, mogu da uđem u okruženje ali koliko ću dugo biti u okruženju je nemoguće pretpostaviti
Svaki predlog dobrodošao.
/var/log/dmesg: /var/log/messages - deo. /var/log/Xorg.0.log:
Code: Select all
[ 148.714]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 148.721] X Protocol Version 11, Revision 0
[ 148.723] Build Operating System: Slackware 14.1 Slackware Linux Project
[ 148.726] Current Operating System: Linux stereo 3.10.17-smp #2 SMP Wed Oct 23 17:13:14 CDT 2013 i686
[ 148.726] Kernel command line: auto BOOT_IMAGE=failsafe ro root=811 vt.default_utf8=1
[ 148.731] Build Date: 09 October 2013 09:56:03PM
[ 148.734]
[ 148.737] Current version of pixman: 0.30.2
[ 148.743] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 148.743] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 148.755] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 30 21:47:39 2014
[ 148.804] (==) Using config file: "/etc/X11/xorg.conf"
[ 148.806] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 148.845] (==) ServerLayout "aticonfig Layout"
[ 148.845] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 148.845] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 148.860] (**) | |-->Device "aticonfig-Device[0]-0"
[ 148.860] (==) Automatically adding devices
[ 148.860] (==) Automatically enabling devices
[ 148.860] (==) Automatically adding GPU devices
[ 148.881] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 148.881] Entry deleted from font path.
[ 148.950] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 148.950] Entry deleted from font path.
[ 149.082] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 149.082] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 149.082] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 149.082] (II) Loader magic: 0x82553a0
[ 149.082] (II) Module ABI versions:
[ 149.082] X.Org ANSI C Emulation: 0.4
[ 149.082] X.Org Video Driver: 14.1
[ 149.082] X.Org XInput driver : 19.1
[ 149.082] X.Org Server Extension : 7.0
[ 149.083] (--) PCI:*(0:2:0:0) 1002:68bf:174b:e144 rev 0, Mem @ 0xc0000000/268435456, 0xdffc0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 149.083] (II) Open ACPI successful (/var/run/acpid.socket)
[ 149.087] Initializing built-in extension Generic Event Extension
[ 149.089] Initializing built-in extension SHAPE
[ 149.092] Initializing built-in extension MIT-SHM
[ 149.095] Initializing built-in extension XInputExtension
[ 149.097] Initializing built-in extension XTEST
[ 149.100] Initializing built-in extension BIG-REQUESTS
[ 149.102] Initializing built-in extension SYNC
[ 149.105] Initializing built-in extension XKEYBOARD
[ 149.107] Initializing built-in extension XC-MISC
[ 149.110] Initializing built-in extension XINERAMA
[ 149.112] Initializing built-in extension XFIXES
[ 149.114] Initializing built-in extension RENDER
[ 149.116] Initializing built-in extension RANDR
[ 149.118] Initializing built-in extension COMPOSITE
[ 149.120] Initializing built-in extension DAMAGE
[ 149.123] Initializing built-in extension MIT-SCREEN-SAVER
[ 149.125] Initializing built-in extension DOUBLE-BUFFER
[ 149.127] Initializing built-in extension RECORD
[ 149.129] Initializing built-in extension DPMS
[ 149.131] Initializing built-in extension X-Resource
[ 149.133] Initializing built-in extension XVideo
[ 149.136] Initializing built-in extension XVideo-MotionCompensation
[ 149.138] Initializing built-in extension XFree86-VidModeExtension
[ 149.140] Initializing built-in extension XFree86-DGA
[ 149.143] Initializing built-in extension XFree86-DRI
[ 149.145] Initializing built-in extension DRI2
[ 149.145] (II) "glx" will be loaded by default.
[ 149.145] (II) LoadModule: "glx"
[ 149.169] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 149.189] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 149.189] compiled for 6.9.0, module version = 1.0.0
[ 149.191] Loading extension GLX
[ 149.191] (II) LoadModule: "fglrx"
[ 149.191] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 149.475] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 149.475] compiled for 1.4.99.906, module version = 13.20.6
[ 149.475] Module class: X.Org Video Driver
[ 149.475] (II) Loading sub module "fglrxdrm"
[ 149.475] (II) LoadModule: "fglrxdrm"
[ 149.475] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 149.503] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 149.503] compiled for 1.4.99.906, module version = 13.20.6
[ 149.503] (II) AMD Proprietary Linux Driver Version Identifier:13.20.6
[ 149.503] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.16
[ 149.503] (II) AMD Proprietary Linux Driver Build Date: Sep 26 2013 16:09:38
[ 149.503] (--) using VT number 7
[ 149.512] (WW) Falling back to old probe method for fglrx
[ 149.605] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 149.622] ukiDynamicMajor: found major device number 245
[ 149.622] ukiDynamicMajor: found major device number 245
[ 149.622] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 149.622] ukiOpenDevice: node name is /dev/ati/card0
[ 149.623] ukiOpenDevice: open result is 12, (OK)
[ 149.882] ukiOpenByBusid: ukiOpenMinor returns 12
[ 149.882] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 149.901] (--) Chipset Supported AMD Graphics Processor (0x68BF) found
[ 149.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 149.902] (II) fglrx(0): pEnt->device->identifier=0x8e5dfe8
[ 149.902] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 149.902] (II) Loading sub module "vgahw"
[ 149.902] (II) LoadModule: "vgahw"
[ 149.903] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 149.912] (II) Module vgahw: vendor="X.Org Foundation"
[ 149.912] compiled for 1.14.3, module version = 0.1.0
[ 149.912] ABI class: X.Org Video Driver, version 14.1
[ 149.912] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 149.912] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 149.912] (==) fglrx(0): Default visual is TrueColor
[ 149.912] (**) fglrx(0): Option "DPMS" "true"
[ 149.912] (==) fglrx(0): RGB weight 888
[ 149.912] (II) fglrx(0): Using 8 bits per RGB
[ 149.912] (==) fglrx(0): Buffer Tiling is ON
[ 149.912] (II) Loading sub module "fglrxdrm"
[ 149.912] (II) LoadModule: "fglrxdrm"
[ 149.912] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 149.912] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 149.912] compiled for 1.4.99.906, module version = 13.20.6
[ 149.914] ukiDynamicMajor: found major device number 245
[ 149.914] ukiDynamicMajor: found major device number 245
[ 149.914] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 149.914] ukiOpenDevice: node name is /dev/ati/card0
[ 149.914] ukiOpenDevice: open result is 14, (OK)
[ 149.914] ukiOpenByBusid: ukiOpenMinor returns 14
[ 149.914] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 149.914] (**) fglrx(0): NoAccel = NO
[ 149.914] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 149.914] (--) fglrx(0): Chipset: "AMD Radeon HD 6700 Series " (Chipset = 0x68bf)
[ 149.914] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe144)
[ 149.914] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 149.914] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 149.914] (--) fglrx(0): MMIO registers at 0xdffc0000
[ 149.914] (--) fglrx(0): I/O port at 0x0000d000
[ 149.914] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 149.930] (II) fglrx(0): AC Adapter is used
[ 149.947] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 149.949] (II) Loading sub module "vbe"
[ 150.149] (II) LoadModule: "vbe"
[ 150.149] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 150.168] (II) Module vbe: vendor="X.Org Foundation"
[ 150.168] compiled for 1.14.3, module version = 1.1.0
[ 150.168] ABI class: X.Org Video Driver, version 14.1
[ 150.168] (II) fglrx(0): VESA BIOS detected
[ 150.168] (II) fglrx(0): VESA VBE Version 3.0
[ 150.168] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 150.168] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 150.168] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 150.168] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 150.168] (II) fglrx(0): VESA VBE OEM Product:
[ 150.168] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 150.169] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 150.169] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 150.169] (II) fglrx(0): PCIE card detected
[ 150.169] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 150.169] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 150.169] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 150.169] (II) fglrx(0): RandR 1.2 support is enabled!
[ 150.169] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 150.169] (==) fglrx(0): Center Mode is disabled
[ 150.169] (II) Loading sub module "fb"
[ 150.169] (II) LoadModule: "fb"
[ 150.169] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 150.176] (II) Module fb: vendor="X.Org Foundation"
[ 150.176] compiled for 1.14.3, module version = 1.0.0
[ 150.176] ABI class: X.Org ANSI C Emulation, version 0.4
[ 150.176] (II) Loading sub module "ddc"
[ 150.176] (II) LoadModule: "ddc"
[ 150.176] (II) Module "ddc" already built-in
[ 156.484] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 156.484] (II) fglrx(0): Output DFP2 has no monitor section
[ 156.484] (II) fglrx(0): Output DFP3 has no monitor section
[ 156.484] (II) fglrx(0): Output CRT1 has no monitor section
[ 156.484] (II) Loading sub module "ddc"
[ 156.484] (II) LoadModule: "ddc"
[ 156.484] (II) Module "ddc" already built-in
[ 156.484] (II) fglrx(0): Connected Display0: CRT1
[ 156.484] (II) fglrx(0): Display0 EDID data ---------------------------
[ 156.484] (II) fglrx(0): Manufacturer: GSM Model: 4bd6 Serial#: 142403
[ 156.484] (II) fglrx(0): Year: 2010 Week: 11
[ 156.484] (II) fglrx(0): EDID Version: 1.3
[ 156.484] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 156.484] (II) fglrx(0): Sync: Separate Composite
[ 156.484] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 156.484] (II) fglrx(0): Gamma: 2.20
[ 156.484] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 156.484] (II) fglrx(0): First detailed timing is preferred mode
[ 156.484] (II) fglrx(0): redX: 0.636 redY: 0.345 greenX: 0.332 greenY: 0.609
[ 156.484] (II) fglrx(0): blueX: 0.156 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 156.484] (II) fglrx(0): Supported established timings:
[ 156.484] (II) fglrx(0): 720x400@70Hz
[ 156.484] (II) fglrx(0): 640x480@60Hz
[ 156.484] (II) fglrx(0): 640x480@75Hz
[ 156.484] (II) fglrx(0): 800x600@56Hz
[ 156.484] (II) fglrx(0): 800x600@60Hz
[ 156.484] (II) fglrx(0): 800x600@75Hz
[ 156.484] (II) fglrx(0): 832x624@75Hz
[ 156.484] (II) fglrx(0): 1024x768@60Hz
[ 156.484] (II) fglrx(0): 1024x768@75Hz
[ 156.484] (II) fglrx(0): Manufacturer's mask: 0
[ 156.484] (II) fglrx(0): Supported standard timings:
[ 156.484] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 156.484] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 156.484] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 156.484] (II) fglrx(0): Supported detailed timing:
[ 156.484] (II) fglrx(0): clock: 85.5 MHz Image Size: 406 x 229 mm
[ 156.484] (II) fglrx(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 156.484] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 156.484] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 156.484] (II) fglrx(0): Monitor name: E1940
[ 156.484] (II) fglrx(0): Serial No: 011TPCA46403
[ 156.484] (II) fglrx(0): EDID (in hex):
[ 156.484] (II) fglrx(0): 00ffffffffffff001e6dd64b432c0200
[ 156.484] (II) fglrx(0): 0b1401036c291778ead025a258559c28
[ 156.484] (II) fglrx(0): 0f5054a76a00314f454f614f01010101
[ 156.484] (II) fglrx(0): 010101010101662150b051001b304070
[ 156.484] (II) fglrx(0): 360096e51000001e000000fd00384b1e
[ 156.484] (II) fglrx(0): 530e000a202020202020000000fc0045
[ 156.484] (II) fglrx(0): 313934300a20202020202020000000ff
[ 156.484] (II) fglrx(0): 003031315450434134363430330a00e6
[ 156.484] (II) fglrx(0): End of Display0 EDID data --------------------
[ 156.484] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 156.485] (II) fglrx(0): EDID for output DFP1
[ 156.485] (II) fglrx(0): EDID for output DFP2
[ 156.485] (II) fglrx(0): EDID for output DFP3
[ 156.485] (II) fglrx(0): EDID for output CRT1
[ 156.485] (II) fglrx(0): Manufacturer: GSM Model: 4bd6 Serial#: 142403
[ 156.485] (II) fglrx(0): Year: 2010 Week: 11
[ 156.485] (II) fglrx(0): EDID Version: 1.3
[ 156.485] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 156.485] (II) fglrx(0): Sync: Separate Composite
[ 156.485] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 156.485] (II) fglrx(0): Gamma: 2.20
[ 156.485] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 156.485] (II) fglrx(0): First detailed timing is preferred mode
[ 156.485] (II) fglrx(0): redX: 0.636 redY: 0.345 greenX: 0.332 greenY: 0.609
[ 156.485] (II) fglrx(0): blueX: 0.156 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 156.485] (II) fglrx(0): Supported established timings:
[ 156.485] (II) fglrx(0): 720x400@70Hz
[ 156.485] (II) fglrx(0): 640x480@60Hz
[ 156.485] (II) fglrx(0): 640x480@75Hz
[ 156.485] (II) fglrx(0): 800x600@56Hz
[ 156.485] (II) fglrx(0): 800x600@60Hz
[ 156.485] (II) fglrx(0): 800x600@75Hz
[ 156.485] (II) fglrx(0): 832x624@75Hz
[ 156.485] (II) fglrx(0): 1024x768@60Hz
[ 156.485] (II) fglrx(0): 1024x768@75Hz
[ 156.485] (II) fglrx(0): Manufacturer's mask: 0
[ 156.485] (II) fglrx(0): Supported standard timings:
[ 156.485] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 156.485] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 156.485] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 156.485] (II) fglrx(0): Supported detailed timing:
[ 156.485] (II) fglrx(0): clock: 85.5 MHz Image Size: 406 x 229 mm
[ 156.485] (II) fglrx(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 156.485] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 156.485] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 156.485] (II) fglrx(0): Monitor name: E1940
[ 156.485] (II) fglrx(0): Serial No: 011TPCA46403
[ 156.485] (II) fglrx(0): EDID (in hex):
[ 156.485] (II) fglrx(0): 00ffffffffffff001e6dd64b432c0200
[ 156.485] (II) fglrx(0): 0b1401036c291778ead025a258559c28
[ 156.485] (II) fglrx(0): 0f5054a76a00314f454f614f01010101
[ 156.485] (II) fglrx(0): 010101010101662150b051001b304070
[ 156.485] (II) fglrx(0): 360096e51000001e000000fd00384b1e
[ 156.485] (II) fglrx(0): 530e000a202020202020000000fc0045
[ 156.485] (II) fglrx(0): 313934300a20202020202020000000ff
[ 156.485] (II) fglrx(0): 003031315450434134363430330a00e6
[ 156.485] (II) fglrx(0): Printing probed modes for output CRT1
[ 156.485] (II) fglrx(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
[ 156.485] (II) fglrx(0): Modeline "1280x768"x60.0 85.50 1280 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 156.485] (II) fglrx(0): Modeline "1280x720"x60.0 85.50 1280 1424 1536 1792 720 771 777 795 +hsync +vsync (47.7 kHz e)
[ 156.485] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 156.485] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 156.485] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 156.485] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 156.485] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 156.485] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 156.485] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 156.485] (II) fglrx(0): Output DFP1 disconnected
[ 156.485] (II) fglrx(0): Output DFP2 disconnected
[ 156.485] (II) fglrx(0): Output DFP3 disconnected
[ 156.485] (II) fglrx(0): Output CRT1 connected
[ 156.485] (II) fglrx(0): Using exact sizes for initial modes
[ 156.485] (II) fglrx(0): Output CRT1 using initial mode 1360x768
[ 156.485] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 156.485] (II) fglrx(0): DPI set to (96, 96)
[ 156.485] (II) fglrx(0): Eyefinity capable adapter detected.
[ 156.485] (II) fglrx(0): Adapter AMD Radeon HD 6700 Series has 6 configurable heads and 1 displays connected.
[ 156.485] (==) fglrx(0): PseudoColor visuals disabled
[ 156.485] (II) Loading sub module "ramdac"
[ 156.486] (II) LoadModule: "ramdac"
[ 156.486] (II) Module "ramdac" already built-in
[ 156.486] (==) fglrx(0): NoDRI = NO
[ 156.486] (==) fglrx(0): Capabilities: 0x00000000
[ 156.486] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 156.486] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 156.486] (==) fglrx(0): UseFastTLS=0
[ 156.486] (II) fglrx(0): Desktop Vsync is enabled.
[ 156.486] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 156.486] (--) Depth 24 pixmap format is 32 bpp
[ 156.486] Loading extension ATIFGLRXDRI
[ 156.486] (II) fglrx(0): doing swlDriScreenInit
[ 156.486] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 156.486] ukiDynamicMajor: found major device number 245
[ 156.486] ukiDynamicMajor: found major device number 245
[ 156.486] ukiDynamicMajor: found major device number 245
[ 156.486] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 156.486] ukiOpenDevice: node name is /dev/ati/card0
[ 156.486] ukiOpenDevice: open result is 15, (OK)
[ 156.486] ukiOpenByBusid: ukiOpenMinor returns 15
[ 156.486] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 156.486] (II) fglrx(0): [uki] DRM interface version 1.0
[ 156.486] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 156.486] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 156.486] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6297000
[ 156.486] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 156.486] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 156.486] (II) fglrx(0): swlDriScreenInit done
[ 156.486] (II) fglrx(0): Kernel Module Version Information:
[ 156.486] (II) fglrx(0): Name: fglrx
[ 156.486] (II) fglrx(0): Version: 13.20.6
[ 156.486] (II) fglrx(0): Date: Sep 26 2013
[ 156.486] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 156.486] (II) fglrx(0): Kernel Module version matches driver.
[ 156.486] (II) fglrx(0): Kernel Module Build Time Information:
[ 156.486] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.17-smp
[ 156.486] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 156.486] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 156.486] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 156.486] (II) fglrx(0): [uki] register handle = 0x00004000
[ 156.509] (II) fglrx(0): DRI initialization successfull
[ 156.523] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[ 156.532] (==) fglrx(0): Backing store disabled
[ 156.532] Loading extension FGLRXEXTENSION
[ 156.532] (**) fglrx(0): DPMS enabled
[ 156.532] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 156.532] (**) fglrx(0): Textured Video is enabled.
[ 156.532] (II) LoadModule: "glesx"
[ 156.554] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 156.684] (II) Module glesx: vendor="X.Org Foundation"
[ 156.684] compiled for 1.4.99.906, module version = 1.0.0
[ 156.684] Loading extension GLESX
[ 156.684] (II) fglrx(0): GLESX enableFlags = 592
[ 156.689] (II) fglrx(0): GLESX is enabled
[ 156.689] (II) LoadModule: "amdxmm"
[ 156.689] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 156.707] (II) Module amdxmm: vendor="X.Org Foundation"
[ 156.707] compiled for 1.4.99.906, module version = 2.0.0
[ 156.729] Loading extension AMDXVOPL
[ 156.729] Loading extension AMDXVBA
[ 156.756] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 156.758] (II) fglrx(0): Enable composite support successfully
[ 156.758] (WW) fglrx(0): Option "VendorName" is not used
[ 156.758] (WW) fglrx(0): Option "ModelName" is not used
[ 156.758] (II) fglrx(0): X context handle = 0x1
[ 156.758] (II) fglrx(0): [DRI] installation complete
[ 156.758] (==) fglrx(0): Silken mouse enabled
[ 156.759] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 156.759] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 156.810] (--) RandR disabled
[ 156.829] ukiDynamicMajor: found major device number 245
[ 156.829] ukiDynamicMajor: found major device number 245
[ 156.829] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 156.829] ukiOpenDevice: node name is /dev/ati/card0
[ 156.829] ukiOpenDevice: open result is 16, (OK)
[ 156.829] ukiOpenByBusid: ukiOpenMinor returns 16
[ 156.829] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 157.556] ukiDynamicMajor: found major device number 245
[ 157.556] ukiDynamicMajor: found major device number 245
[ 157.556] ukiDynamicMajor: found major device number 245
[ 157.556] ukiOpenDevice: node name is /dev/ati/card0
[ 157.556] ukiOpenDevice: open result is 17, (OK)
[ 157.556] ukiGetBusid returned 'PCI:2:0:0'
[ 157.556] ukiOpenDevice: node name is /dev/ati/card1
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card2
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card3
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card4
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card5
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card6
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card7
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card8
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card9
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card10
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card11
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card12
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card13
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card14
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiOpenDevice: node name is /dev/ati/card15
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: open result is -1, (No such device)
[ 157.556] ukiOpenDevice: Open failed
[ 157.556] ukiDynamicMajor: found major device number 245
[ 157.556] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 157.556] ukiOpenDevice: node name is /dev/ati/card0
[ 157.556] ukiOpenDevice: open result is 17, (OK)
[ 157.556] ukiOpenByBusid: ukiOpenMinor returns 17
[ 157.556] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 157.692] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 157.693] ukiDynamicMajor: found major device number 245
[ 157.693] ukiDynamicMajor: found major device number 245
[ 157.693] ukiDynamicMajor: found major device number 245
[ 157.693] ukiOpenDevice: node name is /dev/ati/card0
[ 157.693] ukiOpenDevice: open result is 18, (OK)
[ 157.693] ukiGetBusid returned 'PCI:2:0:0'
[ 157.693] ukiOpenDevice: node name is /dev/ati/card1
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card2
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card3
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card4
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card5
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card6
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card7
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card8
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card9
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card10
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card11
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card12
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card13
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card14
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiOpenDevice: node name is /dev/ati/card15
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: open result is -1, (No such device)
[ 157.693] ukiOpenDevice: Open failed
[ 157.693] ukiDynamicMajor: found major device number 245
[ 157.693] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 157.693] ukiOpenDevice: node name is /dev/ati/card0
[ 157.694] ukiOpenDevice: open result is 18, (OK)
[ 157.694] ukiOpenByBusid: ukiOpenMinor returns 18
[ 157.694] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 157.762] (II) fglrx(0): OverDrive5 Detected!
[ 157.775] (II) fglrx(0): Desktop Vsync is enabled.
[ 157.775] (II) fglrx(0): TFD direct rotation is possible with 90/180/270 rotation
[ 157.776] (II) fglrx(0): Setting screen physical size to 359 x 203
[ 158.253] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 158.254] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 158.254] (**) Power Button: Applying InputClass "keyboard-all"
[ 158.254] (II) LoadModule: "evdev"
[ 158.254] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 158.274] (II) Module evdev: vendor="X.Org Foundation"
[ 158.274] compiled for 1.14.3, module version = 2.8.2
[ 158.274] Module class: X.Org XInput Driver
[ 158.274] ABI class: X.Org XInput driver, version 19.1
[ 158.274] (II) Using input driver 'evdev' for 'Power Button'
[ 158.274] (**) Power Button: always reports core events
[ 158.274] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 158.274] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 158.274] (--) evdev: Power Button: Found keys
[ 158.274] (II) evdev: Power Button: Configuring as keyboard
[ 158.274] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 158.274] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 158.274] (**) Option "xkb_rules" "evdev"
[ 158.274] (**) Option "xkb_model" "pc104"
[ 158.274] (**) Option "xkb_layout" "us"
[ 158.274] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 158.299] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 158.299] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 158.299] (**) Power Button: Applying InputClass "keyboard-all"
[ 158.299] (II) Using input driver 'evdev' for 'Power Button'
[ 158.299] (**) Power Button: always reports core events
[ 158.299] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 158.299] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 158.299] (--) evdev: Power Button: Found keys
[ 158.299] (II) evdev: Power Button: Configuring as keyboard
[ 158.299] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 158.299] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 158.299] (**) Option "xkb_rules" "evdev"
[ 158.299] (**) Option "xkb_model" "pc104"
[ 158.299] (**) Option "xkb_layout" "us"
[ 158.299] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 158.300] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[ 158.300] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 158.300] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 158.300] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 158.300] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[ 158.300] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc03e
[ 158.300] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 158.300] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 158.300] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 158.300] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 158.300] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 158.300] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 158.300] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 158.300] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 158.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input3/event3"
[ 158.300] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 158.300] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 158.300] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 158.300] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 158.300] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 158.300] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 158.300] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 158.300] (II) No input driver specified, ignoring this device.
[ 158.300] (II) This device may have been added with another device file.
[ 158.301] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 158.301] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 158.301] (**) Microsoft Wired Keyboard 600: Applying InputClass "keyboard-all"
[ 158.301] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 158.301] (**) Microsoft Wired Keyboard 600: always reports core events
[ 158.301] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 158.301] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 158.301] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 158.301] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 158.301] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4/event4"
[ 158.301] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9)
[ 158.301] (**) Option "xkb_rules" "evdev"
[ 158.301] (**) Option "xkb_model" "pc104"
[ 158.301] (**) Option "xkb_layout" "us"
[ 158.301] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 158.301] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event5)
[ 158.301] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 158.301] (**) Microsoft Wired Keyboard 600: Applying InputClass "keyboard-all"
[ 158.301] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 158.301] (**) Microsoft Wired Keyboard 600: always reports core events
[ 158.301] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event5"
[ 158.301] (II) evdev: Microsoft Wired Keyboard 600: Using mtdev for this device
[ 158.301] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 158.301] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 158.301] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 158.301] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[ 158.301] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[ 158.302] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[ 158.302] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 158.302] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 158.302] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[ 158.302] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[ 158.302] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 158.302] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 158.302] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 158.302] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 158.302] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input5/event5"
[ 158.302] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[ 158.302] (**) Option "xkb_rules" "evdev"
[ 158.302] (**) Option "xkb_model" "pc104"
[ 158.302] (**) Option "xkb_layout" "us"
[ 158.302] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 158.302] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[ 158.302] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[ 158.302] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 158.302] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 158.302] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 158.302] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 158.302] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 158.302] (II) No input driver specified, ignoring this device.
[ 158.302] (II) This device may have been added with another device file.
[ 158.302] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event6)
[ 158.302] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev keyboard catchall"
[ 158.302] (**) HP HP Link-5 micro dongle: Applying InputClass "keyboard-all"
[ 158.302] (II) Using input driver 'evdev' for 'HP HP Link-5 micro dongle'
[ 158.302] (**) HP HP Link-5 micro dongle: always reports core events
[ 158.302] (**) evdev: HP HP Link-5 micro dongle: Device: "/dev/input/event6"
[ 158.302] (--) evdev: HP HP Link-5 micro dongle: Vendor 0x3f0 Product 0xa407
[ 158.303] (--) evdev: HP HP Link-5 micro dongle: Found keys
[ 158.303] (II) evdev: HP HP Link-5 micro dongle: Configuring as keyboard
[ 158.303] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input6/event6"
[ 158.303] (II) XINPUT: Adding extended input device "HP HP Link-5 micro dongle" (type: KEYBOARD, id 11)
[ 158.303] (**) Option "xkb_rules" "evdev"
[ 158.303] (**) Option "xkb_model" "pc104"
[ 158.303] (**) Option "xkb_layout" "us"
[ 158.303] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 158.303] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event7)
[ 158.303] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev pointer catchall"
[ 158.303] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev keyboard catchall"
[ 158.303] (**) HP HP Link-5 micro dongle: Applying InputClass "keyboard-all"
[ 158.303] (II) Using input driver 'evdev' for 'HP HP Link-5 micro dongle'
[ 158.303] (**) HP HP Link-5 micro dongle: always reports core events
[ 158.303] (**) evdev: HP HP Link-5 micro dongle: Device: "/dev/input/event7"
[ 158.303] (--) evdev: HP HP Link-5 micro dongle: Vendor 0x3f0 Product 0xa407
[ 158.303] (--) evdev: HP HP Link-5 micro dongle: Found 9 mouse buttons
[ 158.303] (--) evdev: HP HP Link-5 micro dongle: Found scroll wheel(s)
[ 158.303] (--) evdev: HP HP Link-5 micro dongle: Found relative axes
[ 158.303] (--) evdev: HP HP Link-5 micro dongle: Found x and y relative axes
[ 158.303] (--) evdev: HP HP Link-5 micro dongle: Found absolute axes
[ 158.303] (II) evdev: HP HP Link-5 micro dongle: Forcing absolute x/y axes to exist.
[ 158.303] (--) evdev: HP HP Link-5 micro dongle: Found keys
[ 158.303] (II) evdev: HP HP Link-5 micro dongle: Configuring as mouse
[ 158.303] (II) evdev: HP HP Link-5 micro dongle: Configuring as keyboard
[ 158.303] (II) evdev: HP HP Link-5 micro dongle: Adding scrollwheel support
[ 158.303] (**) evdev: HP HP Link-5 micro dongle: YAxisMapping: buttons 4 and 5
[ 158.303] (**) evdev: HP HP Link-5 micro dongle: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 158.303] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.1/input/input7/event7"
[ 158.303] (II) XINPUT: Adding extended input device "HP HP Link-5 micro dongle" (type: KEYBOARD, id 12)
[ 158.303] (**) Option "xkb_rules" "evdev"
[ 158.303] (**) Option "xkb_model" "pc104"
[ 158.303] (**) Option "xkb_layout" "us"
[ 158.303] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 158.303] (II) evdev: HP HP Link-5 micro dongle: initialized for relative axes.
[ 158.303] (WW) evdev: HP HP Link-5 micro dongle: ignoring absolute axes.
[ 158.304] (**) HP HP Link-5 micro dongle: (accel) keeping acceleration scheme 1
[ 158.304] (**) HP HP Link-5 micro dongle: (accel) acceleration profile 0
[ 158.304] (**) HP HP Link-5 micro dongle: (accel) acceleration factor: 2.000
[ 158.304] (**) HP HP Link-5 micro dongle: (accel) acceleration threshold: 4
[ 158.304] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/mouse1)
[ 158.304] (II) No input driver specified, ignoring this device.
[ 158.304] (II) This device may have been added with another device file.
[ 158.304] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event10)
[ 158.304] (II) No input driver specified, ignoring this device.
[ 158.304] (II) This device may have been added with another device file.
[ 158.304] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event11)
[ 158.304] (II) No input driver specified, ignoring this device.
[ 158.304] (II) This device may have been added with another device file.
[ 158.304] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event12)
[ 158.304] (II) No input driver specified, ignoring this device.
[ 158.304] (II) This device may have been added with another device file.
[ 158.304] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event13)
[ 158.304] (II) No input driver specified, ignoring this device.
[ 158.304] (II) This device may have been added with another device file.
[ 158.305] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event14)
[ 158.305] (II) No input driver specified, ignoring this device.
[ 158.305] (II) This device may have been added with another device file.
[ 158.305] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event15)
[ 158.305] (II) No input driver specified, ignoring this device.
[ 158.305] (II) This device may have been added with another device file.
[ 158.305] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event8)
[ 158.305] (II) No input driver specified, ignoring this device.
[ 158.305] (II) This device may have been added with another device file.
[ 158.305] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event9)
[ 158.305] (II) No input driver specified, ignoring this device.
[ 158.305] (II) This device may have been added with another device file.
[ 158.305] (II) config/udev: Adding input device HD-Audio Generic HDMI (/dev/input/event16)
[ 158.305] (II) No input driver specified, ignoring this device.
[ 158.305] (II) This device may have been added with another device file.
[ 158.305] (II) config/udev: Adding input device Speakup (/dev/input/event0)
[ 158.305] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[ 158.305] (**) Speakup: Applying InputClass "keyboard-all"
[ 158.305] (II) Using input driver 'evdev' for 'Speakup'
[ 158.305] (**) Speakup: always reports core events
[ 158.305] (**) evdev: Speakup: Device: "/dev/input/event0"
[ 158.306] (--) evdev: Speakup: Vendor 0 Product 0
[ 158.306] (--) evdev: Speakup: Found keys
[ 158.306] (II) evdev: Speakup: Configuring as keyboard
[ 158.306] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 158.306] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD, id 13)
[ 158.306] (**) Option "xkb_rules" "evdev"
[ 158.306] (**) Option "xkb_model" "pc104"
[ 158.306] (**) Option "xkb_layout" "us"
[ 158.306] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 158.311] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 160.659] (II) fglrx(0): EDID vendor "GSM", prod id 19414
[ 160.659] (II) fglrx(0): Using EDID range info for horizontal sync
[ 160.659] (II) fglrx(0): Using EDID range info for vertical refresh
[ 160.659] (II) fglrx(0): Printing DDC gathered Modelines:
[ 160.659] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
[ 160.659] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 160.659] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 160.659] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 160.659] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 160.659] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 160.659] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 160.659] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 160.659] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 160.659] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 161.135] (II) fglrx(0): EDID vendor "GSM", prod id 19414
[ 161.135] (II) fglrx(0): Using hsync ranges from config file
[ 161.135] (II) fglrx(0): Using vrefresh ranges from config file
[ 161.135] (II) fglrx(0): Printing DDC gathered Modelines:
[ 161.135] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
[ 161.135] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 161.135] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 161.135] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 161.135] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 161.135] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 161.135] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 161.135] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 161.135] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 161.135] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)